Medium voltage multi core cable 6/10 kV, XLPE insulated, PVC sheathed, with screens of Cu conductors N – conforming with DIN VDE standard.


Medium voltage power cable for static application in ground, within and outside facilities, outdoor, in cable canals, in water, in conditions where cables are not exposed to heavier mechanical stress and tensile strain. Due to its very low factor of dielectric loss, which remains constant over its entire operating lifetime, and owing to excellent insulation property of XLPE-material, firmly longitudinally spliced with inner and external screen of semi-conductive material (extruded in one process), the cable has a high operating reliability. Used in transformer stations, switching blocks, in electric power plants and industrial plants. To avoid the effects of external impact, the adhering semi-conductive layer extruded between conductor and insulation, along with concentric copper conductor, secures restriction of electric field and resistance to partial discharges.


HRN HD 620 S1
IEC 60502-2
DIN VDE 0276 part 620


Conductor: Cu round conductor, multi wire stranded compacted (RM), class 2 acc. to HRN HD 383 / IEC 60228 / DIN VDE 0295
Inner screen: extruded semi-conductive skin on conductor
Insulation: XLPE (cross-linked polyethylene, recent mark: PE-X) compound DIX 8 acc. to HRN HD 620 S1 ili 2XI1 acc. to DIN VDE 0207 dio 22
External screen: extruded semi-conductive skin on insulation, longitudinally spliced with insulation (+tape of semi-conductive material)
Concentric conductor: in inner layer corrugated spirally wrapped copper wires, in external layer copper tape wrapped in counter-helix
Filler: extruded elastomer or plastomer compound
Sheath: PVC compound DMV-6 acc. to HRN HD 620 S1 or YM5 acc. to DIN VDE 0207 part 5
sheath colour: red

Technical data

Temperature range:
during installation: -20 °C up to +70 °C
max. operating temp.: +90 °C
at short circuit of max. 5 s: up to 250 °C
Nominal voltage: Uo/U=6/10 kV
Max. operating voltage in three-phase systems: 12 kV
Minimal inner bending radius: 12D

Please feel free to contact us if you have any questions or comments.