|NGFLGou

NGFLGou

Application

Cable designed for inner and outdoor application, resistant to oils, moisture, water, UV-irradiation, cold etc. Specially designed for frequent and strong bending in one plane, with small bending radius, which gives him exceptional flexibility and enables a very good space utilization. Used as supply cable and signalling cable for medium mechanical loads, for connection of mobile parts of machines, conveyors and linearly shifted massive equipment segments, specially for cranes, elevators, floor assembly lines and similar. Advantages over round cables: permitted exceptionally small bending radius, high flexibility, good space utilization and “packing” possibility, i.e. group bending.

Standards

DIN VDE 0250 part 809

Construction

Conductor: bare copper (untinned) conductor, fine wired, class 5 or 6 acc. to IEC 60228 / HD 383 / DIN VDE 0295
≤ 25 mm²: highly flexible, class 6
≥ 35 mm²: flexible, class 5
Insulation: rubber compound on ethylene-propylene basis (EPM, earlier: EPR), i.e. 3GI3 or GI1 acc. to DIN VDE 0207 part 20, parallel cores laid in plane, flat construction
Sheath: rubber compound on poly-chloroprene basis (CR), i.e. 5GM2 or 5GM3 acc. to DIN VDE 0207 part 21
sheath colour: black
Core colour marking: acc. to HD 308 S2 / VDE 0293-308

Technical data

 Temperature range:
during application:
-25 °C up to +60 °C
fixed installed:
-40 °C up to +80 °C
at short circuit of max. 5 s:
up to 200 °C
Nominal voltage: Uο/U = 300/500 V
Test voltage: 2000 V
Max. tensile strength:
static: 15 N/mm²
dynamic: 30 N/mm²
Conveyor speed: up to 180 m/min
Other characteristics: resistance to oils, UV-irradiation, moisture and ozone
Behaviour in fire: IEC 60332-1


Please feel free to contact us if you have any questions or comments.

Categories: ,