Flexible insulated conductor for wiring within electrical devices, lighting fixtures, switching- and distribution boxes, i.e. as bridge junction. Laid in dry areas, in closed electrical-installation conduits only for signaling and control circuits. Not for direct application under plaster.



HRN HD 21.3 S3
IEC 60227-3
DIN VDE 0281 part 3



Conductor: bare copper conductor, fine wired stranded, class 5 acc. to IEC 60228 / HD 383 / DIN VDE 0295 (nominal diameter 0,20 mm)
Insulation: PVC compound TI1 acc. to IEC 60227-3 / HD 21.3 S3 / DIN VDE 00281 part 3
Conductor colour identification: acc. to IEC 60446 i.e. EN 60446 (corresponding to DIN VDE 0293)
possible insulation colours: crna.jpg pro_bo.jpg plava.jpg crna.jpg pro_bo.jpg plava.jpg crna.jpg pro_bo.jpg plava.jpg crna.jpg pro_bo.jpg plava.jpg plava.jpg
– yellow-green colour used only for protecting conductor, and green and yellow ones are permitted only if allowed by security regulations, i.e. if they can not get mixed up with the yellow-green conductor
– blue colour is used for neutral conductor, black and brown are applied for alternating current phase conductorse.


Technical data

Temperaturni uvijeti:
during installation: +5 °C up to+70 °C
fixed installed: -30 °C up to+70 °C
at short circuit of max. 5 s: up to 160 °C
ambient temperature at storage: up to 40 °C
Nominal voltage: Uο/U = 300/500 V
Test voltage: 2000 V
Minimal inner bending radius: 4D
Behaviour in fire: IEC 60332-1

Please feel free to contact us if you have any questions or comments.