Tip: BLMT-M
Materijal: EN AW 2030
Standard: SRPS N.F4.101 | SRPS N.F4.106 | IEC 61238-1 Class A
Cable lugs with shear bolts are suitable for aluminium or copper conductors, both solid and stranded – round or sector. The insulation must be removed from the conductor before inserting it into a cable lug with shear bolts. The bolts are tightened using a suitable wrench until their heads shear off. The tightening force in Nm is marked on the lug’s body. Cable lugs with shear bolts have a wide scope of application due to large scope of conductors they can be used with.
The lugs fully comply with requirements of standards SRPS N.F4.101 | SRPS N.F4.106 | IEC 61238-1 Class A Heat shrinkable tube that is delivered on Customer’s request ensures perfect sealing and electrical insulation. The lugs are for single use only. The body of the lug is made of aluminium alloy of high strength AlMgSi which is corrosion resistant and their surface is additionally protected by tin-plating process.
The inside of the lug is filled electrical contact grease and sealed with protective bung. The inside of the lug is toothed in order to ensure better contact.
